ALFA POLIMER INDONESIA produces adhesive specifically formulated for woodworking purposes. We produce a range of viscosity to meet the requirement of individual customers. Its main applications are for general woodworking, flush panel construction, lumber core and rattan manufacturing for the furniture industry.
Barecore is strips of softwood (typically Albasia or locally known as Sengon) glued together to form a piece of board that has a dimension of 2440mm x 1220mm x 13mm. It is commonly used to produce blockboard, which is a wood-based panel, made up of barecore sandwiched between veneers, hardwood, thin MDF or particleboard that is glued together under high pressure.
ALFA POLIMER INDONESIA produces adhesive specifically formulated for woodworking purposes. We produce a range of viscosity to meet the requirement of individual customers. Its main applications are for general woodworking, flush panel construction, lumber core, blockboard manufacturing and rattan manufacturing for the furniture industry.
Blockboard is made up of a core with softwood strips (barecore) that is sandwiched between veneers of hardwood glued under high pressure. Blockboard may be used to make shelves, doors, paneling and partitions for interior used. When using blockboard to make such things as doors or tables, it is important to ensure that the core runs lengthways in order to achieve maximum strength.
ALFA POLIMER INDONESIA cares about the environment and the health of its customers. Therefore we have developed a water-based sanding sealer to replace the conventional solvent-based product, without sacrificing the quality required of the finished goods. Furthermore, with a water based product, the VOC content is significantly lower which provides a healthier option for the applicator.
Sanding sealer is typically a solvent-based product that is applied to a wood surface to fill the gap in the wood grains to ensure a smooth and level finish. This is required to make sure that top-coat process is maximized in terms of glossiness and durability.
ALFA POLIMER INDONESIA produces adhesive specifically formulated for woodworking purposes. We produce a range of viscosity to meet the requirement of individual customers. Its main applications are for general woodworking, flush panel construction, lumber core, blockboard manufacturing and rattan manufacturing for the furniture industry.
Specifically for the furniture industry, we produce a special one-component adhesive with a good water and solvent resistance that meets the requirement of DIN EN 204-D3.
In addition, with reference to the profile wrapping, we have produced a water-based adhesive to replace the conventional solvent-based or polyurethane emulsion product which is typically not stable during storage due to its high sensitivity to heat.
ALFA POLIMER INDONESIA produces adhesive specifically formulated for woodworking purposes. We produce a range of viscosity to meet the requirement of individual customers. Its main applications are for general woodworking, flush panel construction, lumber core, blockboard manufacturing and rattan manufacturing for furniture industry.
Specific to door manufacturing, we produce a special one-component adhesive with a good water and solvent resistance that meets the requirement of DIN EN 204-D3.
Please contact us for further discussion on the specification of the required product.
Jl. Industri Cimareme II no. 5 Padalarang,
Bandung Barat 40553 - Indonesia.
Mon-Thu (08.00-17.00)
Friday (07.30-17.00)
Sat-Sun (Closed)